TEK-MESH™

TEK-MESH uses 2mm perforations that block debris down to spruce needle size. Independent testing shows micro-mesh guards block 95-100% of all debris types including pine needles, maple seeds, and shingle grit—compared to 85% for standard screen guards with 1/8-inch holes. The 2mm perforation size falls within the industry-optimal 100-300 micron range that stops fine debris while handling heavy Canadian rainfall without overflow.

TEK-MESH blocks debris on the surface where it sheds naturally, while foam inserts and brushes sit inside gutters and trap debris within the gutter channel. Micro-mesh guards block 95-100% of debris types, while foam and brushes primarily block large leaves and require periodic removal for cleaning. TEK-MESH's aluminum construction also outlasts foam (which degrades from UV exposure) and brushes (which compress over time).

TEK-MESH costs $42.50 CAD per 5-foot section ($8.50/ft), with DIY installation taking 2-3 hours for 50 linear feet. Professional micro-mesh installation typically costs $18-$40 per linear foot including labor. For a typical home with 150 linear feet of gutters, DIY TEK-MESH costs approximately $1,275 in materials vs. $2,700-$6,000 for professional installation—a savings of $1,425-$4,725.

TEK-MESH requires no in-gutter cleaning after installation—debris sits on top of the mesh where wind and rain naturally shed it. Occasional surface debris removal may be needed in heavy-foliage areas (1-2 times per year), but this is significantly less than the 2-4 annual gutter cleanings required for unprotected systems. Micro-mesh systems reduce cleaning frequency by 60-80% over system lifetime.

Yes. The 20-gauge anodized aluminum construction withstands Canadian winter conditions including heavy snow accumulation and ice loads. The raised mesh design prevents ice damming by allowing water flow even when surface ice forms. However, TEK-MESH does not melt ice—consider pairing with TEK-SIL heated gutter mats for active ice prevention in severe ice dam areas.

Pine needles contain resin that creates a sticky surface coating on micro-mesh guards, reducing water flow over time. This resin buildup is not covered by warranty. Properties under pine trees may require more frequent surface cleaning or alternative gutter protection solutions.

No, TEK-MESH is made of 20-gauge anodized aluminum. The anodized finish resists corrosion without painting and maintains structural integrity under heavy snow and ice loads. Unlike plastic guards that can crack in Canadian winter temperatures, aluminum maintains performance in freeze-thaw cycles.

TEK-MESH is designed for DIY installation requiring only basic tools: drill, tin snips, and ladder. Most homeowners install 50 linear feet in 2-3 hours. The front edge clips onto the gutter lip, and the system can be screwed down for additional wind resistance. Professional installation is optional for homeowners who prefer not to work at heights.

Yes, TEK-MESH fits G-style, K-style, and rounded-edge gutters—the three most common residential gutter profiles in Canada. The flexible design accommodates standard 5-inch and 6-inch gutter widths.

The lifetime transferable warranty covers gutter blockage from leaves, branches, berries, maple seeds, birds, rodents, wasps, and bees. The warranty is transferable between homeowners for the lifetime of the house. Warranty exclusions include: pine needles and similar fine needles; sap dripping from spruce trees; damages from acts of God (falling branches, natural disasters); damages from roof maintenance (ladder impacts); painting the anodized aluminum surface.

Yes. Any unused, full 5-foot sheet of TEK-MESH may be returned for refund. Partial sheets or cut sections are not eligible for return.